Publication


My CV - [Link] latest update 2015
Google Scholar - [Link]
ResearchGate - [Link]
Academia - [Link]

Journals/Peer Reviewed Paper
  1. "The Influence of Chemical and Mechanical Treatment on the Morphology of Carbon Nanofiber" Solid State Phenomena. Vol. 264. pp 107-111. 2017. [Link]
  2. "Optimizing Surface Electromyography Acquisition without Right Leg Drive Circuit" International Journal of Engineering Science Technologies. pp 13-19. 2017. [Link]
  3. "Investigation of Thermal Characteristics of CNF-based Nanofluids for Electronic Cooling Application" Journal of Mechanical Engineering and Sciences. Vol. 10. No. 3.  pp 2336-2349. 2016. [Link] 
  4. "Thermal Conductivity and Viscosity of Deionised Water and Ethylene Glycol-based Nanofluids" Journal of Mechanical Engineering and Sciences. Vol. 10. No. 3.  pp 2249-2261. 2016. [Link]
  5. "Using Palpation for Identification and Discrimination of Optimal Points for EMG Harvesting on the Lower Forearm Muscles" International Journal of Signal Processing Systems, Vol. 4. No. 5. pp. 437-441. 2016. doi: 10.18178/ijsps.4.5.437-441. [Link]
  6. "Design of a Low Cost EMG Amplifier with Discreet Op-Amps for Machine Control". ARPN Journal of Engineering and Applied Science. ISSN 1819-6608. 11:5. pp 3345-3349. 2016. [Link
  7. "Comparison of Thermal Conductivity for HHT-24-CNF-Based Nanofluid using Deionized Water and Ethylene Glycol". Jurnal Teknologi. eISSN: 2180–3722. 77:21. pp 85-89. 2015. [Download][Link]
  8. "EMG Recording of Wrist Gestures Under Non-Ideal Electrode Placement for Machine Control in A Manufacturing Environment". Jurnal Teknologi. eISSN: 2180–3722. 77:21. pp 41-49. 2015. [Download][Link]
  9. "Thermal Conductivity Comparisons of Original and Oxidized Multiwalled Carbon Nanotubes-Waterbased Fluids" Jurnal Teknologi. eISSN: 2180–3722. 76:9. pp 43-47. 2015. [Download][Link]
  10. "Removal of Iron, Manganese and Boron From Industrial Effluent Water using Carbon Nanofibers" Advanced Materials Research. ISSN: 1662-8985. Nanoscience, Nanotechnology, and Nanoengineering: Fundamentals and Applications. Vol. 1109. pp 158-162. 2015[Download] [Link]
  11. "Synthesis and Characteristics of Mesoporous SBA-15 Influence by HMTA as an internal pH Modifier" Applied Mechanics and Materials. ISSN: 1662-7482. Recent Technologies in Design, Management and Manufacturing. Vol. 761. pp 473-478. 2015. [Download] [Link]
  12. "Delivering Key Signals to the Machine: Seeking the Electric Signal that Muscles Emanate" Journal of Physics: Conference Series 546. pp 1-9. 2014. [Download] [Link]
  13. "Pt–Cu Bimetallic Nanoparticles Synthesized by Polyol Method under Different Reduction Condition" Journal of Mechanical Engineering and Technology. Vol. 6. No. 1. ISSN 2180-1053. pp 77-86. 2014. [Download] [Link
  14. "A Comparison Study on the Heat Transfer Behavior of Aqueos Suspensions of Rod Shaped Carbon Nanotubes with Commercial Carbon Nanotube". Advanced Materials Research. ISSN: 1662-8985. Nanosynthesis and Nanodevices. Vol 667. pp 35-42. 2013. [Download] [Link
  15. "An Investigation on Relationship between Process Control Para meters and Weld Penetration for Robotic CO2 Arc Welding using Factorial Design Approach". Journal of Mechanical Engineering and Technology. Vol. 4. No. 2. ISSN 2180-1053. pp 1-16. 2012. [Download] [Link] 
  16. "Investigations on the Thermo-physical properties of Nanofluid-based Carbon Nanofibers under modified Testing Condition". International Journal of Nanoelectronics and Materials. Vol 5. pp 25-30. 2012. [Download] [Link
  17. "Nanofluid-based Nanocarbons: An Investigation of Thermal Conductivity Performance". Journal of Mechanical Engineering and Technology. Vol. 3. No. 1. ISSN 2180-1053. pp 79-87. 2011. [Download] [Link
  18. "Development Of Tin (IV) Oxide Based Catalyst For Carbon Monoxide Emission Control" Journal of Mechanical Engineering and Technology, Vol 1. No. 1, ISSN 2180-1053. pp 15-24. 2009. [Download] [Link
  19. "Applications of XRD and SEM Techniques for Structure and Morphology Elucidation of Tin (IV) Oxide Based Catalyst". Nuclear Science Journal of Malaysia. 18(2). 30-41. 2000. [Link

Conferences/Proceedings
  1. "Investigation on tribological properties of carbon nanotubes as natural oil-based lubricant additive" The 2nd Mytribos Symposium. 2017. pp 35-37. [Link]
  2. "Right Leg Drive in Electromyography: Practical Implementation Considerations and Experimental Investigation on the Effect of DC Offset" International Symposium on Green Manufacturing and Applications (ISGMA). 2017. pp 13-18. [Link]
  3. "Effect of temperature on friction of bio-lubricant under high loading capacity" Proceeding of Mechanical Engineering Research Day (MERD'17). 2017. pp 42-43. [Link]
  4. "DC offset leads to saturation of right leg drive output" Proceeding of Mechanical Engineering Research Day (MERD'17). 2017. pp 92-93. [Link]
  5. "Development of ethylene glycol and water mixture MWCNT-OH based nanofluid with high thermal conductivity" Proceeding of Mechanical Engineering Research Day (MERD'17). 2017. pp 426-427. [Link]
  6. "Optimization parameter for high thermal conductivity and heat transfer using ethylene glycol and water mixture MWCNT-OH based nanofluids" Proceeding of Mechanical Engineering Research Day (MERD'17). 2017. pp 428-429. [Link]
  7. "Thermal conductivity of carbon nanofiber in EG-DI based nanofluids" Proceeding of Mechanical Engineering Research Day (MERD'17). 2017. pp 430-431. [Link]
  8. "Thermo-physical Properties of Nanocarbon Particles in Ethylene Glycol and Deionized Water". Proceeding of Postgraduate Symposium on Green Engineering & Technology (PSGET2016). 2016. pp 64-78. ISBN 978-967-11236-7-6. [Link]
  9. "Characterization of Nanocarbon Particles using Nitrogen Adsorption Analysis: Isotherm, Pore Type, Pore Size and BET Surface Area". Proceeding of Mechanical Engineering Research Day (MERD'16). 2016. pp 127-128. [Link][Download]
  10. "Friction and Wear Characteristic of Different Natural Oil-Based Lubricants with Carbon Nanotubes as Additive" Proceeding of Mechanical Engineering Research Day (MERD'16). 2016. pp 169-170. [Link][Download]
  11. "Effect of Duration Time of Homogenization and Sonication on Stability of MWCNT-OH in Ethylene Glycol and Deionized Water" Proceeding of Mechanical Engineering Research Day (MERD'16). 2016. pp 171-172. [Link][Download]
  12. "Thermal Conductivity Enhancement of Functionalized Multiwalled Carbon Nanotube and Carbon Nanofiber Based Nano-Coolant" Proceeding of Mechanical Engineering Research Day (MERD'16). 2016. pp 173-174. [Link][Download]
  13. "Comparison of Thermal Conductivity for HHT-24 CNF-based Nanofluid using Deionized Water and Ethylene Glycol as Based Fluid". Mechanical Engineering Research Day (MERD'15). 2015. pp 7-8. [Link]
  14. "The Effect of Nanocarbon Characteristics on Enhancing Thermal Properties of Nanofluids". Mechanical Engineering Research Day (MERD'15). 2015. pp 9-10. [Link]
  15. "Thermal Properties and Heat Transfer Study of Dispersed Fluid with Functionalized Multi-walled Carbon Nanotube (MWCNT) Particles". Mechanical Engineering Research Day (MERD'15). 2015. pp 11-12. [Link]
  16. "Effect of Process Variables on the Tensile Shear Strength of Spot Welds in 6061-T6 Aluminum Alloy". Mechanical Engineering Research Day (MERD'15). 2015. pp 13-14. [Link]
  17. "Decoding Wrist Gesture with Combinational Logic for the Development of a Practical EMG Electrode Sleeve". Mechanical Engineering Research Day (MERD'15). 2015. pp 81-82. [Link]
  18. "Binary Mixture of the Decanter Cake and Fiber from the Oil Palm Industry Waste as a Potential Solid Fuel". Mechanical Engineering Research Day (MERD'15). 2015. pp 119-120. [Link]
  19. "How Electromyography Readings from the Human Forearm are Made Cryptic, Trivial or Non-Trivial Information for Use in Synthetic Systems". International Proceedings of Chemical, Biological and Environmental Engineering (IPCBEE). Vol 81. pp 6-10. 2015. DOI: 10.7763/IPCBEE.2015.V81.2. [Link]
  20. "Water-based and Coolant-based CNT-OH Nanofluids: Thermal Conductivity Enhancement Study". 27th Regional Symposium of Malaysia Analytical Sciences (SKAM27), 9-10 Dec 2014, Johor Bahru. [Poster]
  21. "Synthesis and Characteristics of Mesoporous SBA-15 Influence by HMTA as an Internal pH Modifier" International Conference on Design and Concurrent Engineering (iDECON2014), 22-23 Sept 2014, Melaka.
  22. "Adsorption Isotherm Study of Copper Ion from Aqueous Solution by Filamentous Nanocarbons". International Conference of Mathematics, Engineering and Industrial Application (ICOMEIA), 28-30 May 2014, Penang.
  23. "Removal of Iron, Manganese and Boron From Industrial Effluent Water using Carbon Nanofibers". Malaysia-Japan International Conference on Nanoscience, Nanotechnology and Nanoengineering (NANO SciTech & IC-NET 2014), 28 Feb - 3 March 2014, UiTM, Shah Alam, Malaysia.
  24. "A Study on Relationship between Process Variables and Weld Penetration for Gas Metal Arc Welding (GMAW)" International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE SEAM 2011). Solo-Indonesia. 3-4 October 2011. pp 237-244. [Download
  25. "Nanofluid-Based Nanocarbon: Investigation on Thermal Conductivity Performance". Proceeding of Hari Penyelidikan 2011 Fakulti Kejuruteraan Mekanikal Universiti Teknikal Malaysia Melaka. 20 July 2011. pp 16-20. ISBN 978-967-0257-03-7 [Download] [Link 1]
  26. "A Comparison Study on the Heat Transfer Behavior of Aqueos Suspensions of Rod Shaped Carbon Nanotubes with Commercial Carbon Nanotube". International Conference on Nanoscience and Nanotechnology 2011. Intekma Resort, Shah Alam. 2-3 March 2011. [Abstract]
  27. "Investigations on the Thermo-Physical Properties of Nanofluid-based Carbon Nanofibers under Modified Testing Conditions" The International Conference on Experimental Mechanics 2010 (ICEM 2010), Legend Hotel, Kuala Lumpur, 29 Nov -1 Dec 2010. [Abstract]
  28. "Loose and Immobilized MWCNT for Dehydrogenation of n-butane: Effect of Metal and Acid Functions" 3rd International Conference on Functional Materials & Devices 2010. [Abstract
  29. "Comparative Study of Thermal Conductivity Enhancement using Nanofluid Based Nanocarbon for Heat Exchanger Application" 10th Asian Conference on Analytical Sciences 2009 (ASIANALYSIS X), PWTC Kuala Lumpur, 11th-13th August 2009. [Abstract
  30. "Catalytic Growth of Macroscopic Carbon Nanofibers Bodies with Activated Carbon" NANOSCIENCE AND NANOTECHNOLOGY: International Conference on Nanoscience and Nanotechnology. 2008, Vol 1136, pp 238-242. [Abstract]
  31. "Synthesis of Carbon Based Supporting Material Followed By Carbon Nanostructure Growth For Catalysis" Singapore International Chemistry Conference (SICC-5), Singapore, 16-19 Dec 2007
  32. "Catalyst for Automobile Exhaust Emission Control" KUTKM Research Achievement Seminar (REACH), Penang, 18-20 December 2006, pp 273-283. [Download]
  33. "Recovery, Regeneration and Reuse of Spent Bleaching Clay from Palm Oil Refining Waste Material" KUTKM Research Achievement Seminar (REACH), Penang, 18-20 December 2006, pp 294-302. [Download]
  34. "Technological component and its impact on the success of SMI in Skin Care Product" KUTKM Research Achievement Seminar (REACH), Penang, 18-20 December 2006, pp 391-405. [Download]
  35. "Kereaktifan dan Pencirian Mangkin Co(II)-dop SnO2 dan Ni(II)/Co(II)-dop SnO2 Menggunakan XRD dan XPS" Seminar Sains dan Aplikasi Sains dalam Industri (SSASI), Mahkota Century Melaka, 14-15 Februari 2006. [Download
  36. "The Study of LPG Adsorption Ability Using Carbon Adsorbent Test Bed for Carbon Adsorbent Prepared from Waste Materials". Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), Analytical Science: Trends, Challenges and Opportunities, Swiss-Garden Resort, Pantai Balok, Kuantan, 24-26 August 2004. [Download] [Slide]
  37. "Shell from Palm Oil Tree Prepared for Valuable Products (Carbon Molecular Sieve and Carbon Adsorbent)". JIRCAS Working Report. 2004. pp. 166-169. ISSN 1341-710X. [Abstract]
  38. "Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage". KUSTEM 3rd Annual Seminar On Sustainability Science and Management, Kuala Terengganu, 4-5 May 2004. [Download]
  39. "Carbon Adsorbent Prepared from Waste Materials for LPG Gas Storage Media". Symposium of the Malaysian Chemical Engineers (SOMChe2003), Penang, 29-30th December 2003. [Download] [Slide]
  40. "Application of X-Ray Diffraction and Scanning Electron Microscopy Techniques for Structure and Morphology Elucidation of Tin (IV) Oxide Based Catalyst" Asian Conference on the Application of X-Rays and Related Techniques in Research and Industry (ACXRI 2000) Kuala Lumpur, 20-22 November 2000. [Download] [Slide 1] [Slide 2
  41. "Kereaktifan dan Sifat-Sifat Fizik Mangkin Oksida Timah (IV) Terubahsuai Terhadap Pengoksidaan Gas Karbon Monoksida" Simposium Kimia Analisis Malaysia (SKAM XIII), Port Dickson, 6-7 September 2000. [Download] [Slide
Postgraduate Symposium
  1. "Synthesis of CNF-Based Nano-Coolant as Heat Transfer Media for Optimization of Electronic Chip Performance". Postgraduate Research Symposium on Mechanical Engineering 2016 (Prisme 2016). [Link]
  2. "Stability of Carbon Nanotube and Thermal Properties". Postgraduate Research Symposium on Mechanical Engineering 2016 (Prisme 2016). [Link]

Books
  1. "Jom... Mudahnya Inovasi". ISBN 978-967-1223017. 2013. Editor 

Technical Articles
  1. "Nanomaterials Measurement: An Introduction of Nitrogen Adsorption Analysis". August 2010. Buletin FKM UTeM. ISSN 2180-2912. 3rd ed. pp 16-18. [Download
  2. "Absorption Performance of Carbon Materials in Wastewater Industry: A Brief Study on Heavy Metal Removal". 2010. Buletin FKM UTeM. ISSN 2180-2912. 1st ed. pp 25-26. [Download

Exhibition
  1. "Nanofluids: A New Generation Coolants". Melaka International Intellectual Exposition (MIIEx 2016). 7-8 Dec 2016. (Gold Award). [Poster]
  2. "Ecological Brick Epithetical from Cow Chips". Expo Penyelidikan dan Inovasi (UTeMEX 2013). 12 Dec 2013. (Bronze Award). [Poster]
  3. "Rice Husk Foam Enforce as Wall Insulation". Expo Penyelidikan dan Inovasi (UTeMEX 2013). 12 Dec 2013. (Silver Award). [Poster]
  4. "Sol-Gel", Industrial Art & Technology Exhibition (INATEX 2000), 27-29 June 2000. [Slide] [Flash
Thesis
  1. "Mangkin Berasaskan Oksida Timah (IV) bagi Rawatan Emisi Gas Toksik Karbon Monoksida" MSc (Chemistry). 2001. [Download] [Slide
  2. "Pengasingan dan Pengenalpastian Sebatian Kimia daripada Spesies Cinnamomum Porecctum (Lauraceae)" BSc (Industrial Chemistry). 1999. [Download]